Smart toilets have transformed bathrooms across Australia, offering features such as heated seats, bidet cleansing, automatic flushing, and even deodorising systems. While many models include self-cleaning functions, they still require regular care to keep them fresh, hygienic, and fully functional.

In this guide, we’ll show you step by step how to clean a smart toilet, along with expert tips to protect its advanced technology and extend its lifespan.

Why Regular Cleaning Is Important

Unlike standard toilets, smart toilets combine ceramic surfaces with sensitive electronics, water nozzles, and filters. Skipping maintenance can lead to:

• Bacteria build-up and unpleasant odours.

• Reduced efficiency of bidet nozzles or sensors.

• Mineral deposits and limescale, especially in hard water areas.

• Shortened product lifespan.
  
  

Keeping up with a cleaning routine doesn’t just preserve hygiene—it also ensures you get the most out of your investment in a BathTec smart toilet.

Preparing Before You Clean

Smart toilets aren’t cleaned in the same way as traditional ones. Before starting:

• Turn Off Power and Water – Switch off the electrical connection and water supply to prevent accidental flushing or nozzle activation.

• Gather Supplies – Use mild toilet cleaner, a soft sponge, antibacterial wipes, and a small brush for hard-to-reach areas.

• Check the Manual – Every brand, including BathTec, may have specific guidelines. Always confirm before using new cleaning agents.
  
  

Step-by-Step Guide: How To Clean a Smart Toilet

 

1. Wipe Down Exterior Surfaces

The seat, lid, and base of your smart toilet can accumulate dust and fingerprints. Use a damp microfiber cloth with a gentle detergent. Avoid bleach or abrasive powders, which can scratch surfaces or interfere with touch controls.

 

2. Clean the Toilet Seat Carefully

Many smart toilet seats include heating elements and delicate sensors. To protect them:

• Use a soft, damp cloth with mild soap.

• Pay extra attention to hinges and edges where dirt can build up.

• Never soak the seat or expose it to excessive water.
  
  

3. Maintain the Bidet Nozzles

Nozzles are a key hygiene feature. Although most BathTec smart toilets feature self-cleaning nozzles, occasional manual cleaning is recommended:

• Extend the nozzles via the remote or side control panel.

• Gently wipe them with warm, soapy water using a soft cloth.

• Avoid pulling or scrubbing, as nozzles are sensitive components.
  
  

4. Clean the Bowl

The ceramic bowl should be treated with care:

• Apply a non-abrasive toilet cleaner around the rim and inside the bowl.

• Use a soft-bristled brush for gentle scrubbing.

• Flush to rinse. If your toilet is powered off, briefly switch it on to activate the flush cycle.
  
  

5. Care for Sensors and Control Panels

Infrared sensors and remote controls need special attention:

• Wipe panels and sensors with a dry or slightly damp microfiber cloth.

• Avoid spraying cleaner directly onto electronics.
  
  

6. Refresh or Replace Filters

Many smart toilets include deodorising or water-softening filters. To maintain effectiveness:

• Remove the filter as per the user manual.

• Clean or replace it according to the manufacturer’s schedule.
  

What Not To Do When Cleaning

To protect your smart toilet from damage:

• Do not use harsh chemicals like bleach, ammonia, or strong acids.

• Avoid scouring pads, steel wool, or abrasive sponges.

• Never apply high-pressure water near electronic parts.

• Don’t ignore routine cleaning—even with self-cleaning features, occasional manual care is essential.
  
  

 

Tips for Ongoing Maintenance

Smart toilets are low-maintenance, but consistency is key. Here’s how to keep yours in peak condition:

• Weekly Quick Clean – Wipe down surfaces and seat with a damp cloth.

• Monthly Deep Clean – Inspect nozzles, scrub the bowl, and clean control panels.

• Descale When Needed – In hard water regions, use a toilet-safe descaler to prevent limescale.

• Filter Check – Replace deodorising or water filters every few months for best performance.
  
  

These small steps prevent build-up and ensure your toilet functions seamlessly year-round.

Professional Servicing

While DIY cleaning covers most needs, arranging professional servicing once a year can help. Experts can inspect electronic sensors, flush mechanisms, and nozzles to ensure your BathTec smart toilet continues performing at its best.

Conclusion

Knowing how to clean a smart toilet ensures your bathroom stays hygienic, fresh, and efficient. By using gentle cleaners, avoiding harsh chemicals, and following a consistent routine, you can keep both the ceramic and electronic components in top condition.

BathTec offers a premium collection of In-Wall Tank Toilets, Tankless Smart Toilets, Heated Seat Smart Toilets, and Shower Toilets to suit every modern bathroom. With proper care, your BathTec smart toilet will remain a centrepiece of comfort and hygiene for years to come.